-
Bolt,carr 1/2X2-3/4
Vendor:TelsmithSKU: 1112689Regular price $31.10 USDRegular price -
No Description
Vendor:TelsmithSKU: 1113343Regular price $0.00 USDRegular price -
VFD,40HP,3R,480V
Vendor:TelsmithSKU: 1113230Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1112707Regular price $0.00 USDRegular price -
Feed Plate SHAFT,5060
Vendor:TelsmithSKU: 1112732Regular price $1,227.23 USDRegular price -
DIE,STA/SWG,2238,18 Sld End
Vendor:TelsmithSKU: 1112681Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1112676Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1112674Regular price $0.00 USDRegular price -
HAMMER,28CR/CERAMIC,3036
Vendor:TelsmithSKU: 1112642Regular price $2,018.64 USDRegular price -
HAMMER,28CR/CERAMIC,2421
Vendor:TelsmithSKU: 1112640Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1112525Regular price $0.00 USDRegular price -
SHEAVE,16.0PD 3-B Qd-sk
Vendor:TelsmithSKU: 1112480Regular price $0.00 USDRegular price -
SHEAVE,TIMING,6.3PD,QD-SF14M
Vendor:TelsmithSKU: 1112456Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1112336Regular price $0.00 USDRegular price -
Secondary Scraper, 60, Martin
Vendor:TelsmithSKU: 1112178Regular price $0.00 USDRegular price -
Timing Belt, 2800-14M-55
Vendor:TelsmithSKU: 1112458Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1111219Regular price $0.00 USDRegular price -
Wire CLOTH,3-10 1/2X4-0
Vendor:TelsmithSKU: 1112282Regular price $0.00 USDRegular price -
Primary Scraper, 60, Martin
Vendor:TelsmithSKU: 1112177Regular price $0.00 USDRegular price -
Timing Belt, 3150-14M-55
Vendor:TelsmithSKU: 1112127Regular price $0.00 USDRegular price -
Retainer, Die
Vendor:TelsmithSKU: 1112140Regular price $0.00 USDRegular price -
No Description
Vendor:TelsmithSKU: 1112134Regular price $0.00 USDRegular price -
SHEAVE,TIMING,8.4PD,QD-E,14MM
Vendor:TelsmithSKU: 1112120Regular price $0.00 USDRegular price
Epoxy or cementitious?
Choose epoxy for dynamic or high-torque machinery (crushers, compressors, mills), chemical exposure, or when you need maximum strength and creep resistance. Epoxy grouts reach 12,000 to 19,000 psi, bond to steel and concrete, and tolerate vibration that breaks down cement grout.
Choose cementitious for static baseplates, columns, anchor bolts and general structural work. Non-shrink cement grouts cost far less per cubic foot, mix with water only, and meet ASTM C1107 for precision support. For most one-off baseplates they are the practical choice.
