Aquaseal LVS Pile Grout, 2 CF kit

Pre-proportioned marine epoxy grout kit for pile encapsulation, pairing a two-component, 100 percent solids, low viscosity epoxy with graded silica aggregate. The high flow mix pumps or pours into FRP pile jackets to encapsulate piles above and below the water line, in fresh or salt water. Mortar compressive strength is 8,000 psi per ASTM C109. Each 2.0 cubic foot unit contains 3 gallons of Part A, 2 gallons of Part B, and four 55 lb aggregate bags. Used on pier supports, bridges, and offshore rigs.

• 28-day compressive strength: 8,000 psi
• Yield: 2 cubic feet per unit
• Packaging: 2.0 CF kit: 3 gal Part A, 2 gal Part B, 4 x 55 lb aggregate bags
• Working time: Gel time 45-60 min at 75F